Phil Wood Track Hub Rear Classic

Phil Wood Track Hub Rear
Our Phil Wood Track Hub Rear Classic high flange single fixed track hubs are available in 28, 32, and 36 spoke hole configurations (other spoke hole count options are available upon request). We also offer our rear track hubs with 2 bearing options: StandardPhil spec bearings which have full contact seals and have a 100% fill with our Phil Waterproof grease.CarbonytePhil spec bearings are our low drag bearing option which have partial contact seals and have a 30% fill with our full synthetic PhilCarbonytegrease.

SPECIFICATIONS

Hub shell material
6061 Aluminum

Axle material
Stainless steel

End cap material
Stainless steel (heat-treated)

Washer material
Stainless steel (heat-treated)

Bolt material
Stainless steel

Lockring material
Stainless steel

Rear hub width
120 mm

Axle diameter
12.68 mm

Bearing availability
R8 (Standard), R8 (Carbonyte)

Rear hub weight
379 grams

Rider and bike weight limit
280 lbs / 127 kgs

Materials
All of our manufactured items are machined out of US-produced materials.

HUB DIMENSIONS

Axle length
120 mm

Left side flange diameter
66 mm

Right side flange diameter
66 mm

Left side flange to center
42.5 mm

Right side flange to center
29 mm

Please note: For optimal performance, we recommend using the Phil Wood track cog. They are offered in both 1/8 and 3/32. Our specification for the threading is 1.370 x 24 tpi, but Phil Wood hubs will accommodate most high quality cogs. If, during installation, the cog jams or binds, STOP. Forcing a cog onto the hub will result in irreparable damage to the threads. As with any cog installation, lubricate both the cog and lockring threads. Some cog manufacturers are making cogs that are not ideal for use with Phil Wood hubs due to their thickness (which is generally a result of plating). For this reason, we do not recommend using any other manufacturers lockring on our track hubs. The additional thickness can result in stripping of the lockring and/or hub threads because there is not enough thread engagement. Please call us if you have additional questions.
Lock ring is included with ar rear hubs. Colors other than black and silver my take longer to ship. Colors add to your cost. Keirin is 110 only.Phil Wood Track Fixed gear Rear high Flange hubs. Black or silver. 28, 32 or 36 Hole. We also have the matching rear Phil Wood track and fixed gear hubs. USA Made.Track hubs are available in the classic high flange or traditional low flange in 28, 32, and 36 spoke hole configurations (other spoke hole count options are availabe upon inquiry). Traditional spacings of 120, 126, and 130mm are available to choose from. These spacings are the inside diameter of your rear frame dropout. Keirin (110mm) spacing is also available and the axles are adapted to the narrower 8mm rear axle dropout. Endcaps and washers for the Keirin hubs are knurled. The rear pictured is the slotted SLR.