Profile Z Coaster Freecoaster Cassette Rear Hub

PROFILE Z COASTER FREECOASTER Hub 36H
PROFILE Z COASTER FREECOASTER HUB 90 degrees slack is standard(Various Attributes May Be Chosen By Specifying Part Types In Order Comments)
This hub allows dirt, street or flatland bike riders to do roll back freestyle bike tricks in style. 48 Degrees is the standard Slack. You can buy a different slack ring in desired in the future. We also have the Z coaster hub guard.

Profile Hub Product Details
The ZCoaster is a proprietary hub to Profile: it essentially works as a spring/pawl cassette hub that can be disengaged into a freecoaster with varying slack options.Made here in the USA at the Profile factory.—————Highlights of the ZCoaster:–The ZCoaster’s Pawl is “Z” shaped to allow for engagement/disengagement by the center Slack-Cam Ring. This also allows for adjustable slack. See Slack-Cam Ring options A through C.–The ZCoaster’s pawls and ratchet ring have a proprietary coating that offer smooth engagement.There are 48 points of engagement: all pawls engage simultaneously.Weights:14mm GDH Chromo 9t Chromo: 583g/20.55oz14mm GDH Titanium 9t Titanium: 466g/16.4oz3/8 Chromo 9t Chromo: 559g/19.7oz3/8 Titanium 9t Titanium: 461g/16.25oz–The ZCoaster has an outer driver support bearing for the oversized driver mechanism. This bearing supports the driver from the outside.***The ZCoaster’s freecoaster mechanism can only work if the jam nuts are fully tightened for optimum compression.Utility patents and design patents pending.—————Weights:14mm complete Zcoaster with 9t chromo, 1/8 driver: 585g/20.6oz3/8 volcano cone complete Zcoaster with 9t chromo, 1/8 driver: 585g/20.6ozChromo 14mm GDH Axle (no hardware): 182g/6.4ozSolid Chromo 14mm Axle (no hardware): 217g/7.65oz3/8 titanium axle (no hardware): 66g/2.30oz14mm titanium axle (no hardware): 103g/3.6ozchromo 9t 3/32 (loaded with 2 driver bearings): 104g/3.65ozchromo 9t 1/8 (loaded with 2 driver bearings): 108g/3.8ozTitanium 9t 3/32 (loaded with 2 driver bearings): 66g/2.3ozTitanium 9t 1/8 (loaded with 2 driver bearings): 67g/2.35oz—————Hub Dimensions:Center to Drive Side Flange–32mmFlange Diameter on Drive-Side–66mmCenter to Non-Drive Flange–32mmFlange Diameter on Non-Drive Side–50mm

Note: We also have the compete wheel which may work out much better for you than the bmx wheel building process.